Welcome to Modern Petrotech

Valves Control Valves Electrical Cables Instrument Cables Oil casing tubular goods – including flowlines, pipelines and headers Seamless carbon steel tubes Heat Exchangers and Pressure Vessel Direct and indirect fired heaters and steam generators Welded & cladded steel pipes

Gate Valves

Bolted Bonnet API 600

Product Feature:

Meet the requirements of API 600 - ISO 104 34 / BS 1414 / API 603 / API 6D-ISO 14313 /ASME B 16.34

Face to Face and End to End dimensions conform to ASME B 16.10 / ISO 5752 / BS 2080 / DIN

End flange dimensions conform to ASME B 16.5 / ISO 7005-1 / API 605 / BS 3293 / DIN

Butt weld end dimensions conform to ASME B 16.25

The Body to Bonnet joint is flat in ISO PN 20 / ASME 150# valves, a male and female joint is used in PN 50 / 300# & PN 110 / 600# and ring joint is used in higher classes

Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312

Ball Valves

Check Valves

Double Block & Bleed Valves

Pressure Seal Bonnet

Product Feature:

	Meet the requirements of API 600 - ISO 10434 / BS 1414 / API 6D-ISO 14313 /ASME B 16.34
	Face to Face and End to End dimensions conform to ASME B 16.10 / ISO 5752 / BS 2080 / DIN
	End flange dimensions conform to ASME B 16.5 / ISO 7005-1 / API 605 / BS 3293 / DIN
	Butt weld end dimensions conform to ASME B 16.25
	Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312

Through Conduit API 6D

Product Feature:

	Meet the requirements of API 600 - ISO 10434 / BS 1414 / API 6D-ISO 14313 /ASME B 16.34
	Face to Face and End to End dimensions conform to ASME B 16.10 / ISO 5752 / BS 2080 / DIN
	End flange dimensions conform to ASME B 16.5 / ISO 7005-1 / API 605 / BS 3293 / DIN
	Butt weld end dimensions conform to ASME B 16.25
	Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312

Through Conduit API 6A

Product Feature:

	Meet the requirements of API 6A
	Face to Face and End to End dimensions conform to API 6A
	End flange dimensions conform to API 6A
	Butt weld end dimensions conform to API 6A
	Screwed end dimensions conform to API 6A
	Available in all popular bore sizes and PSL 1 through 4
	Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312